How to Fix and Clear The Error Code on My Brother Printer
Brother Printers are one of the most used printers in the world. Just like any other machines, they also can show errors after being used regularly. The errors may seem to be a minor one or it can be a big one depending on the nature of the error.
That’s why we have listed the most frequently occurring errors on HP printers so that you have a better understanding of their nature and the ways to fix them.
02 - This error is the most commonly linked with driver or printer cable problems, turning the printer off and on should remove this error message.
10 – It is known as " Supplies Memory Error ", it indicates that:
is having problem with a toner cartridge chip. You should try to reset the printer and reinstall the toner cartridge if the problem occurs again. If these fail, it could be a hardware issue.
11- This error occurs due to the absence of paper in your printer.
12- If this code appears, check whether your cartridges are correctly installed and that the cover is not open.
13- It is related to a paper jam, just follow the printer instructions to remove this error code.
14- The printer fails to recognise your cartridges. You need to remove and reinstall to solve the error.
v16- This error is related to the low level of toner or empty toner.
20-This error occurs due to print job exceeding the memory capacity of the printer. Simply, reduce the DPI or make the document simpler to solve the error.
21-It is similar to the above mentioned error.
22-This error is related to a communication problem between e printer and your computer. You need to try different connect method and also need to check the cable quality to remove this error.
24-This error is related to the presence of too many print jobs waiting in the queue.
25-Similar to the above error.
Fix Printer Problems for Wireless Printer.
30-This error is related to PostScript firmware. You should try to print an alternative PostScript file or reseat the PostScript SIMM.
30.1-This error is due to the hard disk drive crash in your printer. You need to press the 'select' button on your printer to solve this error.
40-This error is due to break in data transfer connection between printer and computer. Kindly check the connection settings and al cable connections.
41-This error is due to a temporary print engine issue. You should turn of the printer and plug off for a minute to solve this error.
49-This error can occur due to many reasons. The primary cause of this error is related to the firmware.You will be required to update the firmware and restart the printer. If the error occurs again, there will be most likely a hardware failure.
50.1-This error occurs due to an issue with the fuser. It is mainly dude to the low temperature and the failure of the fuser to warm up.
50.2-This error is due to a warm-up failure or time-out of the period allocated for the warm-up.
50.3-This error occurs due to high temperature causing the thermistor to become too hot.
50.4-This error occurs due to a bad mains supply
Printer Troubleshooter for Windows 10.
50.5-This error is e due to the presence of wrong type of fuser.
50.6-This error occurs due too possible overheating resulting in fuser heater being cut-off.
50.7-A problem with the fuser drive motor has occurred which has then caused a fuser pressure release mechanism failure.
50.8-This error happens due to a fault with the secondary thermistor.
50.9-This error happens due to the detection of a high fuser temperature.
51-This error occurs mainly in older printer models. This error is dues to the breaking of or missing of the bottom of the cartridge. The error can also happen due to any scanner unit issue.
52-This error is due to the use of polygon mirror during the scanning process. Contact technician to solve this error.
54-This error occurs due to the non-removal of sealing tape from your cartridge.
55-This error occurs due to a poor connection between the DC controller and the formatter. You will need to contact an HP engineer to solve this error.
56-This error occurs due to many reasons. It depends on the model of HP printer. You need check the paper tray, the stacker, the duplex unit, and duplex mode.
57.xx-This error occurs due to failure of one or more of the fans on your HP printer. It will be solved by contacting an HP engineer.
58.xx-This error occurs due to an issue with an environmental sensor, fan, memory controller, power or DC controller.
59-This error occurs due to a motor error. You need to change or reseat the memory to solve this error.
How to Restore Printer Connection.
60.xx-This error occurs normally in newer models. It is due a problem with the motorised tray lift. Check for any obstructions such as staples or paperclips.
61-This error occurs due to the detection of a defective formatter board or bad memory SIMMs. You should reseat the memory chips or replace the formatter board to solve this error.
62-Same as above.
63-Same as above.
64-This error occurs due to the detection of either a defective D.C. controller or defective formatter board. You need to turn the printer off and on or reseat the DIMMs formatter board to solve this error.
65-Same as above.
66-This error occurs due to the presence of an additional paper or envelope tray. You should check the connections between the additional units. If the problem is not solved, contact HP engineer.
67-This error occurs due to a service printer error or a memory error. You can solve this error by checking the condition of paper trays. Check if they aren’t damaged along with connection cables or reseat any SIMMs if required.
68-This error occurs due to a NVRAM error. You need to reset the NVRAM and printing a configuration page.
69-This error is due to a problem with the duplex unit. You need to remove any obstructions that may be causing this error.
70-This is due to incompatible issue of SIMM or cartridge and printer. It’s a rare issue, hence, you need to contact HP engineer.
72-This error occurs due to the detection of a defective cartridge.
79-This error occurs due an issue with either an accessory, I/O card or the firmware. You need to update the firmware to solve this.
89-This error occurs due to the PostScript ROM failure. You should check your PC ROM and change it if it’s damaged or corrupted.
99-This error occurs due to firmware upgrade and a failure with the flash firmware. You will need to update to firmware or replace the flash firmware DIMM to solve this error.
Many of the errors can be easily solved. However, if you are reluctant on this matter, you can always take the help of experts to solve such errors. or
Call Our Toll Free Number : +1(844) 434-9333